We offer a full range of fibre patch cords in simplex & duplex, with various connectors and cable colours available. As well as different thicknesses of jackets, such as 900um, 2 and 3mm. A selection of our connectors have extra options for Uni-Boots, Angled Boots & Short Boots.
- Mechanical performance: IEC 61754-20 Standard
- IP67 water and dust protection
- Easily add/install jumper cables for a future expansion
- Low insertion loss and added loss
- Height of attenuation
- Flexibility with small bending radius and excellent cable routing properties
- End-face geometry and quality superior to IEC and Telcordia Standards
- The material in the jumper cable is all-weather and UV-resistant
- RoHS and REACH compliant materials
- Multi-purpose outdoor
- For the connection between the distribution box and RRH
- Deployment in remote radio head cell tower applications
Connector Types
| Type | Reference | Conformance | Note |
| LC | IEC 61754-20 | Single-mode duplex
Multimode duplex |
APC: Green connectors UPC: Blue connectors UPC: Grey Connectors |
Patch Cord Versions
| Jumper Tolerance Requirement | |
| Overall Length (L) (M) | Length of Tolerance (CM) |
| 0<L≤20 | +10/-0 |
| 20<L≤40 | +15/-0 |
| L>40 | +0.5%L/-0 |
Mechanical Characteristics
| Test | Conditions | Reference |
| Endurance | 500 matings | IEC 61300-2-2 |
| Vibration | Frequency: 10 to 55Hz, Amplitude: 0.75mm | IEC 61300-2-1 |
| Cable Retention | 400N (main cable); 50N (ranch part) | IEC 61300-2-4 |
| Strength of Coupling Mechanism | 80N for 2 to 3mm cable | IEC 61300-2-6 |
| Cable Torsion | 15N for 2 to 3mm cable | IEC 61300-2-5 |
| Fall | 10 drops, 1m drop height | IEC 61300-2-12 |
| Static Lateral Load | 1N for 1h (main cable); 0.2N for 5min (ranch part) | IEC 61300-2-42 |
| Cold | -25°C, 96h duration | IEC 61300-2-17 |
| Dry Heat | +70°C, 96h duration | IEC 61300-2-18 |
| Change of Temperature | -25°C to +70°C, 12 cycles | IEC 61300-2-22 |
| Humidity | +40°C at 93%, 96h duration | IEC 61300-2-19 |
Optical Characteristics
| Parameter | Reference | ||
| Single Mode | Multimode | ||
| Insertion Loss | Typical value ≤0.15dB; Maximum ≤0.30 | Typical value ≤ 0.15dB; Maximum ≤0.30 | IEC 61300-3-34 |
| Return Loss | ≥60dB (APC); ≥50dB (UPC) | ≥ 30dB (UPC) | IEC 61300-3-6 |
End-Face Geometry
| Item | UPC (Ref: IEC 61755-3-1) | APC (Ref: IEC 61755-3-2) |
| Radius of Curvature (mm) | 7 to 25 | 5 to 12 |
| Fibre Height (nm) | -100 to 100 | -100 to 100 |
| Apex Offset (μm) | 0 to 50 | 0 to 50 |
| APC Angle (°) | / | 8° ±0.2° |
| Key Error (°) | / | 0.2° max |
End-Face Quality (Single-Mode)
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 25 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 25 to 115 | None | None | |
| C: Adhesive | 115 to 135 | None | None | |
| D: Contact | 135 to 250 | None | None | |
| E: Rest of Ferrule | None | None | ||
End-Face Quality (Multimode)
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 65 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 65 to 115 | None | None | |
| C: Adhesive | 115 to 135 | None | None | |
| D: Contact | 135 to 250 | None | None | |
| E: Rest of Ferrule | None | None | ||
